Elite 300W LED Grow Light with Ballast
The Elite 300W LED Grow Light with Ballast produces 815 µmol/s PPF at 2.7 µmol/J efficiency using full-spectrum LED lighting. It covers a 1m × 1m growing area and provides five dimming levels: 20%, 40%, 60%, 80%, and 100%. The fixture also supports daisy-chain connection, making it suitable for multi-light indoor growing systems.
The IP65-rated LED grow light provides dust protection and protection against water jets. Its L90 lifetime exceeds 60,000 hours, supporting long-term LED operation. The unit arrives pre-assembled, so installation consists of hanging the fixture and connecting the power supply.
Elite 300W LED Grow Light – Key Specifications
Use a clean specification table rather than long paragraphs.
| Specification | Details |
| Power | 300W |
| PPF Output | 815 µmol/s |
| Efficiency | 2.7 µmol/J |
| Spectrum | Full Spectrum |
| Coverage | 1m × 1m |
| Dimming | 20% / 40% / 60% / 80% / 100% |
| Daisy Chain | Yes |
| Protection | IP65 |
| LED Lifetime | L90 > 60,000 hours |
| Installation | Pre-assembled |
This section captures users searching around 300W LED grow light specifications and makes the product easy to compare.
High-Efficiency 300W LED Grow Light
The Elite 300W LED Grow Light has a 300W power rating, an 815 µmol/s PPF output, and 2.7 µmol/J efficacy. The 300W figure describes electrical power consumption, while PPF measures the total photosynthetic photon flux produced by the fixture. The 2.7 µmol/J value describes how efficiently the LED grow light converts electrical energy into photosynthetically active photons.
Full-Spectrum Lighting for Indoor Growing
The full-spectrum LED grow light provides a broad light spectrum for indoor plant growth across different stages. The same fixture supports lighting requirements during seedling and early growth, vegetative growth, and flowering, making full-cycle indoor growing possible without changing the primary light source. Consistent spectrum output also provides a stable lighting setup as plants progress through their growth cycle.
Designed for 1m × 1m Grow Areas
The 1m × 1m LED grow light coverage makes the Elite 300W suitable for indoor growing spaces with a stated coverage area of 1m × 1m. This includes appropriately sized grow tents and small indoor cultivation areas. Actual light intensity across the canopy depends on hanging height, canopy density, growth stage, reflective surfaces, and fixture positioning, so the 1m × 1m coverage specification does not represent a uniform PPFD value at every point.
Adjustable Dimming from 20% to 100%
The 300W dimmable LED grow light provides five output settings: 20%, 40%, 60%, 80%, and 100%. This adjustable output gives growers direct control over light intensity within the available range. Lower settings provide reduced light output during early growth, while higher settings provide greater output as plant development progresses, with the appropriate level depending on growth stage and environmental conditions.
Daisy-Chain Capability for Multiple Lights
The daisy-chain LED grow light supports connection with compatible fixtures for multi-light installations. This configuration connects multiple lights within a coordinated lighting system and simplifies control across growing areas that use more than one fixture. Daisy-chain capability also provides a scalable approach when a single 300W LED grow light does not match the required lighting configuration.
IP65 Dust and Water Resistance
The IP65-rated LED grow light provides complete protection against dust ingress and protection against water jets from any direction. The first digit, 6, represents the highest dust-protection rating, while the second digit, 5, represents protection against water jets. An IP65 rating does not indicate that the fixture is waterproof or suitable for submersion.
Long-Lasting LED Performance
The LED grow light has an L90 lifetime exceeding 60,000 hours, meaning the LEDs are specified to retain at least 90% of their initial light output beyond that operating period under the relevant test conditions. This L90 specification describes long-term LED light-output maintenance rather than simply stating that the fixture operates for 60,000 hours before failure.
Pre-Assembled for Quick Installation
The pre-assembled LED grow light arrives ready for installation, reducing the amount of assembly required before use. The setup follows a simple hang-and-plug configuration, allowing the fixture to be positioned above the growing area and connected to its power supply. This design suits new installations, lighting replacements, and upgrades where minimal assembly is preferred.
Who Is the Elite 300W LED Grow Light For?
The Elite 300W LED Grow Light suits indoor growers using a growing area of approximately 1m × 1m and requiring full-spectrum lighting, adjustable output, and 815 µmol/s PPF. Its specifications also suit users replacing older grow lighting or building multi-fixture installations.
Ideal for:
- Indoor growers: The 300W LED grow light provides full-spectrum lighting for controlled indoor growing environments.
- Hobby growers: The 1m × 1m coverage suits compact growing spaces used for small-scale indoor cultivation.
- Grow-tent users: The stated 1m × 1m coverage matches appropriately sized grow tents.
- Growers with approximately 1m × 1m spaces: The fixture provides a specified coverage area of 1m × 1m.
- Users upgrading from older grow lighting: The 2.7 µmol/J efficacy, 815 µmol/s PPF, dimming, and full-spectrum output provide defined specifications for a lighting upgrade.
- Users wanting full-spectrum lighting: The fixture provides full-spectrum LED lighting across seedling, vegetative, and flowering stages.
- Growers wanting dimming control: Five output settings provide adjustable intensity at 20%, 40%, 60%, 80%, and 100%.
- Multi-light setups requiring daisy chaining: Daisy-chain capability supports installations that use multiple compatible fixtures.
Consider another light if:
A different LED grow light provides a more suitable configuration when the growing area is substantially larger than 1m × 1m or the required lighting output exceeds 815 µmol/s PPF. A larger cultivation area can require greater total PPF or multiple fixtures to achieve the required light distribution across the canopy.
Why Choose the Elite 300W LED Grow Light?
The Elite 300W LED Grow Light combines 300W LED output, 815 µmol/s PPF, and 2.7 µmol/J efficiency for controlled indoor growing. Its full-spectrum light supports a consistent lighting setup across different growth stages, while the 1m × 1m coverage suits appropriately sized growing areas. Five dimming levels—20%, 40%, 60%, 80%, and 100%—provide adjustable light output. Daisy-chain capability supports multi-light configurations, while the IP65 rating provides dust protection and water-jet resistance. The L90 lifetime exceeds 60,000 hours, indicating long-term LED light-output maintenance. The pre-assembled design reduces installation work and supports a straightforward hang-and-plug setup.
How to Set Up the Elite 300W LED Grow Light
Create a simple step-by-step section:
- Unpack the pre-assembled fixture.
- Position the light securely above the growing area.
- Connect the required power supply.
- Start at an appropriate dimming level.
- Adjust intensity according to plant development and environmental conditions.
- Use the daisy-chain function when configuring multiple compatible fixtures.
