The Complete Package – Powerful and Efficient with an Even Footprint
Lumatek Zeus Pro LEDs are the most powerful grow lights money can buy. It delivers an intense, full-spectrum output that’s close to natural sunlight, and with an almost perfectly even footprint.
Why Choose a Lumatek LED?
2020’s crop of LEDs marked the point where LED lighting overtook HPS as the industry leading technology – and Lumatek LEDs are among the best of the bunch. Like the Maxibright Daylight LED and Gavita LED, it features a design that uses multiple lighting strips. This spreads the diodes out across the canopy, creating a footprint that’s almost perfectly even. Regular lamp and reflector set-ups just couldn’t get close to this! This type of LED grow light is sometimes called a “spider”.
Lumatek LEDs produce full-spectrum lighting that’s close to natural sunlight, with a large peak in the red areas. This allows them to pile on plenty of weight during the bloom phase, causing fruits to swell in size. You won’t have any problems hitting your targets with these units!
The included controller has four output settings: 25%, 50%, 75% and 100%. It’s also possible to regulate multiple units simultaneously using the (separately available) Lumatek lighting controller.
Lumatek LEDs are supplied disassembled, and in boxes that are easy to transport, unlike the Gavita 1700e which requires a pallet delivery. This means that they can easily fit into awkward places – though loft hatches, for instance. They can be assembled by a competent person in a matter of minutes.
With 60,000 hour lifespans, Luamtek LEDs represent amazing value for money. On a 12/12 cycle you can expect to get over 13 years of use from one of these units. And don’t forget that you’ll never have to change a lamp over this time period, saving you up to £100 a year or £1300+!
For optimal results, use the PHOTOBIO Advanced Quantum PAR Meter to accurately measure and adjust your LED grow light’s intensity. This ensures your plants receive the correct light levels at every stage of growth, maximising photosynthesis, efficiency, and yield potential; pair it alongside increasing CO2 for maximum results.
CO2 supplementation boosts photosynthesis rates, allowing plants to make more efficient use of the light energy emitted by your grow light. It’s not uncommon to see increases in yields of 10% to 20%.
Contains
1 x Lumatek Zeus Pro 465w 2.7umol or Lumatek Zeus Pro 465w 2.9umol
How To Use
How to Use the Lumatek Zeus Pro
Lumatek Zeus grow lights can be assembled in around five minutes. All you need to do is put together the frame, screw the driver (power supply) in place, fit the LED light strips, and connect up the controller.
The Lumatek Zeus Pro 465w is great for a 1m square area but could be used in a 1.2m area. Lumatek recommend a light height of around 500mm (perhaps a little lower for the 465w version). However, this is only a general guide. When plants first go under an LED grow light they can take a while to adjust to it. When the plants first go under it, we would recommend a slightly higher distance from the light to the top of the canopy, or turning down the power. Over the course of several days the light height can be reduced slowly and/or power can be increased gradually. After the plants have developed it may be possible to reduce the light height to below 500mm. Keep an eye out for any signs of stress (droopy or discoloured leaves) and increase the light height if necessary.
Lumatek have done a really good job with the instruction manual, and it makes the process incredibly clear.
